Gerson hydraulic beam press machine is the die cutting press machine that used for most large width material such as the fabric,leather ,rubber etc.,

1.Gerson hydraulic beam press which have larger cutting areas, thus let the press can die cutting larger area parts, in single of multiples of material parts, from a wide sheet or roll of material.

2. Four column, twin cylinder high strong construction make the hydraulic beam press machine more stable and strong.

3.The cutting die/kife/toll is placed on the material or under the beam  and the table is pushed beneath the cutting head (or beam).

4.Choice of cutting area and wide range of optional work feed equipment such as manual feed,auto sliding table,belt feeder etc.,

5.Any special requirement for the hydraulic beam press machine ,welcome to contact Gerson machinery.

Model	GRBC-25T to 500T
Max cutting force(T)	From 25 Tons to 500 Tons
Distance between upper press board andworktable(mm)	50-240
Cutting area(mm)	1250×600,700,800,900,1000,1200, 1500
	1470×600,700,800,900,1000,1200, 1500
	1600×600,700,800,900,1000,1200, 1500
Motor power	1.5 to 22KW
Machine Net weight (KG)	1600 to 16500
	1700 to 17500