The type of GR model swing arm is small die cutting press and the operation is very safe.

1.The stroke end setting-up to use outting-knives of different height is automatic without any adjustment.
2.Circuit board can adjust the pressure to of oneself biggest, and the descending press time of shake arm is adjusted by the electric potentiall machine so we can use a smaller mold
to cut to break normally.
3.Only with the hands pressing a switch can users carry out to shake arm to descend,so the operation is very safe.

4.Gerson also have other type swing arm cutting machine  from 8T to 28T.
Technical Specification
Model GR-20C GRA-27C/1/2
Maximum Cutting Power(KN/TONS) 196KN(20TONS) 265KN(27TONS)
Cutting Table 900*430mm 1000,1200*500,600mm
Swaying Arm Width(mm) 370mm 500mm/610mm
Max.Stroke(mm) 90mm 100mm
Motor Power(KW/HP) 0.75KW/1HP 1.1KW/1.5HP
Machine Dimensions(mm) 1000*900*1400mm 1200*1030*1400mm
Packing Size(mm) 1050*1050*1500mm 1350*1200*1550mm
New Weigh(With oil)(kg) 580kg 750-910kg
Gross Weight(kg) 650kg 800-950kg