The three key cutting press is swing arm clicker press with three different cutting pressure for different material and dies cutting without any re-adjustment for die cutting .
The control push buttons are ergonomic, so allowing the operator increased comfort. The push buttons are controlled by way of two hand safety relay, meaning the buttons have to be activated 5/10ths/sec in between each other too allow cutting stroke activation, and requires constant activation to keep up a cut stroke
Model | GRA-220/3 | GRA-270/3 | GRA-270M/3 | GRA-270L/3 | |
Maximum cutting force | 22T | 27T | 27T | 27T | |
Table area | 900×430mm | 1000×500mm | 1000×500mm | 1000×500mm | |
Swing arm width | 370mm | 370mm | 500mm | 610mm | |
Cutting stroke | 90mm | 90mm | 90mm | 90mm | |
Motor power | 1.1KW | 1.5KW | 1.5KW | 1.5KW | |
Electric Supply Voltage | 3×440/415/400/380/220/200V, 50/60 Hz | ||||
Single phase 240V/220V, 50/60 Hz | |||||
Packing size | 1050×1000×1500mm | 1150×1200×1500mm | 1150×1200×1500mm | 1150×1200×1500mm | |
N.W(with oil) | 650kg | 960Kg | 1050kg | 1200kg | |
G.W | 740kg | 1120Kg | 1210kg | 1360kg |